Site information / DMA setup guide
How to Set Up a DMA Card: Step-by-Step Guide
Install a DMA card, connect the second PC, check the firmware and test the speed. A step-by-step DMA setup guide for beginners.
Before you start
You need a DMA card, a second PC or laptop, the USB cable that came with the card, and a DMA cheat for your game. A DMA fuser and an input device are optional. New to DMA? Read what a DMA card is first.
Step 1: install the card
Shut down the gaming PC and unplug it. Insert the DMA card into a free PCIe slot (an M.2 DMA card goes into a free M.2 NVMe slot), then screw the bracket down.
Step 2: connect the second PC
Connect the card's USB port to the second PC with the supplied cable. Use a USB 3 port on the second PC for full speed.
Step 3: firmware
The card needs custom firmware so it looks like an ordinary device. If you bought DMA firmware from us, we configure it for your card and walk you through it.
Step 4: driver and speed test
On the second PC, install the USB driver your card needs (most DMA cards use the FTDI FT601 driver). Start the gaming PC, then run the speed test from your cheat's tool. A 75T reads around 300 MB/s and a 100T PRO around 750 MB/s.
Step 5: fuser and input device
Wire the fuser between the two PCs and your monitor for on-screen ESP, and plug the input device between your mouse and the gaming PC for aimbot.
Card not detected?
- Reseat the card, or try another PCIe slot
- Use a different USB 3 port or cable on the second PC
- Reinstall the USB driver on the second PC
Stuck at any step? Send us a message on WhatsApp or Discord and we will help you finish the setup.
DMA Middle East
Need clarification?
Contact our team before placing an order or making a payment.